When installing travertine pavers, you should start from one corner and work your way towards the center. Then, make sure you follow the pattern grid that the installer has provided. Using a soft hammer head, compact the travertine pavers until they are tightly set. You can also use a string to keep the pattern straight. Ensure that the space between each piece of terrazzo is small.
The last step in a travertine pavers installation is to prepare the ground. To prepare the ground, clear away all grass, weeds, and other debris. If the project is large, add some crushed limestone to create a solid base. If the soil is too soft, use a compactor to add it to the ground. After the first layer of travertine pavers is laid, apply another layer of sand to finish the surface.
To install travertine pavers, first dig out the area where they will be placed. Remove any existing turf or dirt before you begin the installation. You can use geotextile or a plate compactor to compact the base material. Once the base material has been removed, you can start laying down the travertine. Once the pavers are laid down, you must place the FlexBond around them.
After laying down the travertine pavers, you should prepare the base area. You can use cement or sand to prepare the surface. After setting up the base, rake the sand and mix it with the cement and sand. You can then assemble the travertine pavers. You can even dry the travertine pavers by using a hose to hose them down.
Travertine pavers are made from limestone and other natural stones. Unlike other materials, travertine is durable and resists stains and is easy to maintain. Moreover, travertine is very easy to install. There are a wide range of travertine pavers available, so choosing the right ones will greatly increase the value of your property. There are also some factors that you should consider before making your purchase.
Depending on the type of setting surface, you can choose to fill your pavers with sand or concrete. The sand should be clean and dry. In addition, you should make sure that the surface is level. You should also make sure that the travertine pavers are flat and have a flat surface. Whether you choose a dry or wet installation, sand and concrete should be thoroughly cleaned. A smooth surface is the best base for travertine pavers.
For a professional look, travertine pavers should be installed by a qualified contractor. You can install travertine pavers using a sledgehammer or you can use a flexbond. If you prefer a dry set installation, you can simply pour the mortar into the joints of travertine pavers. It is not necessary to apply cement. Alternatively, you can apply the sand on the subfloor and place the travertine pavers on top of the sand.